TZO 100

TZO 100 1/8 Off-Road Buggy Tyres (Set of 4)

The TZO 100 is a 1/8 off-road buggy tyre developed for high-bite indoor clay and high-traction outdoor race tracks, where maximum forward drive and consistent handling are essential. Its aggressive connected bar and pin tread design delivers strong acceleration, precise steering response, and predictable cornering on polished surfaces and groove-building track conditions.

The tread pattern combines connected centre bars with strategically positioned pins to maximise forward traction while maintaining smooth, controlled steering through all phases of the corner. The result is a tyre that provides consistent grip under acceleration, stable corner entry, and predictable side bite on high-traction surfaces.

A reinforced carcass provides increased stability under load, helping the tyre maintain its shape during hard cornering and extended race durations. This delivers consistent handling throughout qualifying and long mains, while supporting higher corner speeds on demanding track layouts.

Product Options*

• Pre-Glued Set – Includes four (4) tyres factory mounted and glued to TZO wheels with foam inserts installed, ready to race.
• Unglued Set – Includes four (4) tyres, four (4) TZO wheels, and four (4) foam inserts. Assembly and gluing required.
• Tyres Only – Includes four (4) tyres only. Wheels and foam inserts sold separately.

*Unless otherwise selected, TZO tyre sets are supplied factory mounted and glued to TZO wheels with foam inserts installed, ready for racing.

Features

• Sold as a set of four (4) tyres
• Designed for 1/8 off-road buggy racing
• Optimised for high-bite indoor clay and high-traction outdoor tracks
• Aggressive connected bar and pin tread pattern for maximum forward drive
• Predictable steering response and consistent cornering performance
• Reinforced carcass for improved stability and handling consistency
• Delivers smooth side bite and increased corner speed
• Engineered to perform with TZO foam inserts
• Suitable for club racing through to national-level competition

Recommended Track Conditions

• High-bite indoor clay
• High-traction outdoor dirt
• Polished racing surfaces
• Groove-building tracks
• Dry, prepared race conditions

Compound Guide

Choosing the Right Compound:TZO compounds are engineered to perform across a wide range of temperatures and track conditions. Select your compound based on track temperature, available traction and surface moisture for the best balance of grip, consistency and tyre life.

X Compounds

Ultra Soft

Best Working Temperature: 0–27°C (0–80°F)

Designed for maximum grip in cool, cold or wet conditions and low-traction tracks.

• Traction: Maximum grip
• Best For: Low traction, cold or wet track conditions
• Feel: Extremely soft with maximum forward bite

Super Soft

Best Working Temperature: 27–38°C (80–100°F)

A very high-grip compound suited to medium to low traction tracks in warmer conditions.

• Traction: Very high grip
• Best For: Medium to low traction tracks in warm conditions
• Feel: Very soft with strong forward bite

Soft

Best Working Temperature: 27–38°C (80–100°F)

The all-round compound for a wide range of track conditions.

• Traction: High grip
• Best For: General-purpose use across most track conditions
• Feel: Balanced with consistent grip

Medium

Best Working Temperature: 32–38°C (90–100°F)

Designed for high-traction tracks and hotter conditions where added stability is required.

• Traction: Medium grip
• Best For: High traction tracks and hot weather
• Feel: Slightly firmer with increased stability

Hard

Best Working Temperature: 38°C+ (100°F+)

Built for extremely hot conditions and very high-traction tracks where durability is key.

• Traction: Lower grip
• Best For: Very high traction tracks and extreme heat
• Feel: Firm with maximum stability and durability

Ultra Clay (Green/Gold)

Best Working Temperature: 0–10°C (0–50°F)

A soft clay compound developed for early morning or late evening slick conditions.

• Best For: Cool temperatures, wet or damp tracks, low traction surfaces
• Feel: Soft with maximum grip and excellent forgiveness
• Use When: Track temperatures are low and maximum traction is needed

Supra Clay (Pink/Gold)

Best Working Temperature: 10–21°C (50–70°F)

A mid-range clay compound for changing conditions throughout the day.

• Best For: Midday conditions that are wet, damp or beginning to dry
• Feel: Balanced, predictable and consistent
• Use When: Track conditions are between wet and dry

Supreme Clay (White/Gold)

Best Working Temperature: 16–32°C (60–90°F)

A firmer clay compound intended for drier, higher-traction surfaces.

• Best For: Dry tracks, warm temperatures and polished clay surfaces
• Feel: Increased carcass support allowing the pins to do more of the work
• Use When: The track is drying or fully dry, or as a transition before moving to a standard rubber compound.

Soft Long Wear

Best Working Temperature: TBA

TZO has not yet released official compound specifications.

• Traction: High grip
• Best For: High-grip and abrasive track conditions where tyre longevity is important
• Feel: Consistent performance with increased wear resistance

Black Magic

Best Working Temperature: TBA

TZO has not yet released official compound specifications.

• Traction: High grip
• Best For: A wide range of racing conditions
• Feel: Consistent grip with predictable handling