Tekin 4.0T Eliminator Motor

The Tekin 4.0T Eliminator Motor is a high-performance brushless motor designed specifically for 1:10 scale RC cars. Manufactured by the leading brand Tekin, this motor delivers unmatched power, speed, and efficiency, making it the perfect upgrade for any serious RC car enthusiast. With its precision-engineered design and advanced technology, the 4.0T Eliminator Motor delivers smooth and consistent performance, even under the most demanding conditions. Whether you're racing on the track or tearing up the trails, the Tekin 4.0T Eliminator Motor delivers the power and precision you need to stay ahead of the competition.

Tekin’s GEN4 Lineup introduces the Eliminator purpose built Drag Racing motor, engineered for award-winning performance. Utilizing Oversized Ultra Torque rotors and the best materials available, we designed the Eliminator to cut weight while reducing resistance, resulting in a purebred Drag Racing machine. From Pro Mod to Street Eliminator classes, the Eliminator motors create huge power across all RPMs whenever you need it. The GEN4 Eliminator is competition performance with the speed and power you need to gap the competition.

The GEN4 motor line is a completely new ground-up design. We put in the design and test time so you can reduce your lap times. The new stator is precision stamped and pressed, increasing efficiency and reducing resistance. Our motors are hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and re-buildable, the new GEN4 Eliminator motor is a premium performance power plant for the serious drag racer.

Input Voltage: 1-2S LiPO - 2.5T / 3.5T / 4.0T / 4.5T / 5.0T

Weight: 5.1oz / 145g

Shaft Dimensions: 3.18mm (1/8") x 15.3mm

Motor Diameter: 35.85mm / 1.40"

Motor Length: 50.25mm / 1.978"
Max Operating Temperature: 180°F / 82°C

Bearing Dimensions: Front: 4x13x5mm

                                     Rear: 1/8x3/8x5/32"

Rotor Size: 13mm TORQUE RED - 3.5T / 4.0T / 4.5T / 5.0T
                    13.5mm ULTRA TORQUE YELLOW - 2.5T

Rebuildable: Yes

DRAG RACE

 1:10 2WD No Prep

 1:10 2WD Street Eliminator

 1:10 2WD Street Outlaw

 1:10 2WD Pro Stock

 1:10 2WD Pro Mod

 1:10 2WD Top Fuel

 60 Degrees Adjustable Timing Advance

 Drag Racing Specific Design

 CNC Machined 6061-T6 Billet Aluminum Heat Sink Can

 ULTRA TORQUE Neodymium Sintered Magnet

 Precision Engineered for Maximum Energy Conversion

 High Purity Copper Windings Maximize Conductivity

 Low Resistance, High Power Solder Tabs

 Sensored System Ready

 Anodized End-bell Plates Maximize corrosion and Wear Resistance

 High RPM Precision Bearings

 Oversized Front Bearing

 Rebuild-able Design

 Solder-less Sensor PCB Replacement

 Legal in Major Race Governing Bodies

 No-Prep RC Legal

MOTOR ONLY

TT2758 - 5.0T ELIMINATOR
TT2771 - 4.5T ELIMINATOR
TT2759 - 4.0T ELIMINATOR
TT2772 - 3.5T ELIMINATOR
TT2773 - 2.5T ELIMINATOR

DRAG RACE SYSTEMS

TT2810 - RS PRO / 5.0T ELIMINATOR System
TT2811 - RS PRO / 4.5T ELIMINATOR System
TT2812 - RS PRO / 4.0T ELIMINATOR System
TT2813 - RS PRO / 3.5T ELIMINATOR System
TT2814 - RS PRO / 2.5T ELIMINATOR System

MOTOR PARTS

TT2786 - Redline GEN4 Full Rebuild Kit

TT2787 - Redline GEN4 End Cap Set & Hardware

TT2789 - Redline GEN4 Sensor PCB

TT2790 - Redline GEN4 Solder Tabs & Isolator

BEARINGS

TT2788 - Redline GEN4 Bearing Set

Front: 4x13x5mm / Rear: 1/8x3/8x5/32"

TUNING ROTORS

TT2777 - 12.5mm TORQUE GREEN Modified Rotor
TT2778 - 12.3mm TORQUE ORANGE Modified Rotor
TT2779 - 12.1mm TORQUE WHITE Modified Rotor
TT2780 - 13mm TORQUE RED

TT2781 - 13.5mm ULTRA TORQUE YELLOW

SENSOR CABLES

TT3835 - FlatWire 100mm Ribbon Sensor Cable

TT3836 - FlatWire 150mm Ribbon Sensor Cable

TT3837 - FlatWire 200mm Ribbon Sensor Cable

TT3838 - FlexWire 100mm Sleeved Sensor Cable

TT3839 - FlexWire 150mm Sleeved Sensor Cable

TT3840 - FlexWire 200mm Sleeved Sensor Cable

TT3841 - FlexWire 275mm Sleeved Sensor Cable