Sparko

Bumpy Bladders: This new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb, Not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: This new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb, Not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: This new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb, Not suited for all conditions but where they worked the results in terms of performances were...

Allen Screw for Emulsion: after several disappointing tests with commercial screws, we decided to design and produce our own Allen screw for V2 Shock Caps. Specifications: - Material:  Alloy steel with strength class 12.9 (1200...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly process.  Fits the following brands that use our V2...

The new RC-Project fan mount is designed for 1/8 brushless motors with diameters ranging from 39 to 41.5 mm and is compatible with 30 mm and 40 mm fans. Made from a single piece of Ergal 7075 T6, it offers high structural rigidity and lightweight...

The main body of the Flywheel Remover Wrench is produced in Ergal 7075-T6 by plate and then hard coated;  the extraction screw is produced in Steel and then undergoes a heat treatment to increase the surface hardness.Unlike all other products on the...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion. The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure an M2 screw, The NEW V2 Shock Cap can also be used for...

TZO Wheel Nut Black 4pcs