Tekin Spec-R 25.5 T Gen-4 Motor

Tekin’s SPEC-R brushless motors are engineered for award-winning performance. Utilizing the best materials available we redesigned the SPEC-R to cut weight while reducing resistance, resulting in a purebred Spec racing machine. On Road or Off, the SPEC-R handles all situations, providing smooth power and control across all RPMs when you need it. The SPEC-R is competition performance with the speed you need to win. Pair with an RS PRO Black Edition for the ultimate in SPEC Racing Equipment.

The GEN4 motor line is a completely new ground-up design. We put in the design and test time so you can reduce your lap times. The new stator is precision stamped and pressed, increasing efficiency and reducing resistance. Our motors are hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and re-buildable, the new GEN4 SPEC-R motor is a premium performance power plant for the serious racer.

Input Voltage: 1-2S LiPO - 25.5T / 21.5T / 17.5T / 13.5T / 10.5T / 6.5T

Weight: 5.1oz / 145g

Shaft Dimensions: 3.18mm (1/8") x 15.3mm

Motor Diameter: 35.85mm / 1.40"

Motor Length: 50.25mm / 1.978"
Max Operating Temperature: 180°F / 82°C

Bearing Dimensions: Front: 4x13x5mm

                                     Rear: 1/8x3/8x5/32"

Rotor Size: 12.3mm BLACK - 25.5T
                    12.5mm BLUE - 21.5T / 17.5T / 13.5T / 10.5T

Rebuildable: Yes

OFF ROAD

 1:10 2WD Stock Buggy

 1:10 2WD Stock Truck

 1:10 2WD Stock Short Course

 1:10 4WD Stock Buggy

ON ROAD

 1:12 2WD Pan Car

 1:10 2WD Pan Car

 1:10 World GT

 1:10 Formula 1

 1:10 4WD Stock Touring Car 1:10 Drift

OVAL

 1:10 2WD

 1:10 SK Car

 1:10 Stock Car

 1:10 Winged Sprint

1S LiPo Classes

 60 Degrees Adjustable Timing Advance

 SPEC Racing Specific Design

 CNC Machined 6061-T6 Billet Aluminum Heat Sink Can

 Neodymium Sintered Magnet

 Precision Engineered for Maximum Energy Conversion

 High Purity Copper Windings Maximize Conductivity

 Low Resistance, High Power Solder Tabs

 Sensored System Ready

 Anodized End-bell Plates Maximize Corrosion and Wear Resistance

 High RPM Precision Bearings

 Oversized Front Bearing

 Rebuild-able Design

 Solder-less Sensor PCB Replacement

 Legal in Major Race Governing Bodies

 ROAR Approved

MOTOR ONLY

TT2760 - 25.5T SPEC-R GEN4 Motor
TT2761 - 21.5T SPEC-R GEN4 Motor
TT2762 - 17.5T SPEC-R GEN4 Motor
TT2763 - 13.5T SPEC-R GEN4 Motor
TT2764 - 6.5T SPEC-R GEN4 1:12 Motor
TT2765 - 10.5T SPEC-R GEN4 Motor

SYSTEMS

RS GEN3 SPEC
TT2791 - RS GEN3 SPEC / 21.5T GEN4 SPEC-R System
TT2792 - RS GEN3 SPEC / 17.5T GEN4 SPEC-R System
TT2793 - RS GEN3 SPEC / 13.5T GEN4 SPEC-R System

RS GEN3
TT2794 - RS GEN3 / 21.5T GEN4 SPEC-R System
TT2795 - RS GEN3 / 17.5T GEN4 SPEC-R System
TT2796 - RS GEN3 / 13.5T GEN4 SPEC-R System
TT2797 - RS GEN3 / 10.5T GEN4 SPEC-R System

RS PRO BLACK EDITION

TT2807 - RS PRO BE / 21.5T GEN4 SPEC-R System
TT2808 - RS PRO BE / 17.5T GEN4 SPEC-R System
TT2809 - RS PRO BE / 13.5T GEN4 SPEC-R System

MOTOR PARTS

TT2786 - Redline GEN4 Full Rebuild Kit

TT2787 - Redline GEN4 End Cap Set & Hardware

TT2789 - Redline GEN4 Sensor PCB

TT2790 - Redline GEN4 Solder Tabs & Isolator

BEARINGS

TT2788 - Redline GEN4 Bearing Set

                Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
TT3849 - Redline GEN4 Ceramic Bearing Set

                Front: 4x13x5mm / Rear: 1/8x3/8x5/32"

TUNING ROTORS

TT2775 - 12.3mm 25.5T ROAR Spec Rotor - BLACK

TT2776 - 12.5mm SPEC-R Rotor - BLUE

SENSOR CABLES

TT3835 - FlatWire 100mm Ribbon Sensor Cable

TT3836 - FlatWire 150mm Ribbon Sensor Cable

TT3837 - FlatWire 200mm Ribbon Sensor Cable

TT3838 - FlexWire 100mm Sleeved Sensor Cable

TT3839 - FlexWire 150mm Sleeved Sensor Cable

TT3840 - FlexWire 200mm Sleeved Sensor Cable

TT3841 - FlexWire 275mm Sleeved Sensor Cable