Tekin RSX PRO / 7.5T System

The Tekin RSX PRO / 7.5T System is a high-quality combo package from the renowned Tekin brand that delivers advanced performance in 1:10 RC racing. It includes the RSX PRO ESC and a 7.5T motor, perfectly matched to deliver superior power and speed. With advanced features like on-board programming, adjustable throttle profiles, and low-resistance circuitry, this combo is designed to provide maximum control and efficiency. The RSX PRO also features a compact design for easy installation and a rugged aluminum housing for durability. If you're looking for unbeatable power and precision in your 1:10 racing, the Tekin RSX PRO / 7.5T System is the ultimate solution.

The RSX PRO is Tekin's premiere modified racing Electronic Speed Control. Using only the best available components and materials, this ESC is performance defined. Bred for 1:10th scale modified competition, the RSX PRO gives you maximum power with precise control and reliability. With a highly efficient aluminum heat sink housing and an entire array of adjustable features, you have the ability to fine-tune the RSX PRO's massive power for the win.

Included with the RSX PRO is a detachable fan shroud system for maximum cooling in extreme racing conditions. Data Logging, a High Voltage HD Internal BEC and optional 3rd Channel Drag Brake Adjustment come standard as well as access to Team Driver setups. Take your racing program to the next level with the Tekin RSX PRO.

Controls: Forward/Brake/Reverse

Input Voltage: 2S-3S LiPo / 4-12S NiMH-NiCD

Motor Limit Brushless Mode: 2S -  2.5T 2-pole 36mm Can

                                                   3S -  10.5T 2-pole 36mm Can / 3500kV

Motor Limit Brushed Mode: 2S - 6 Turn 36mm Can

                                                3S - 12 Turn 36mm Can

Max Current: 210amps per phase*

HV Adjustable BEC: 6.0v / 7.4v @ 5.5amps

Dimensions: 1.21 x 1.43 x .82" / 31.2 x 37.2 x 21mm

Weight: 1.4oz / 40g

*per FET manufacturer specs

OFF ROAD

 1:10 2WD Buggy

 1:10 2WD Truck

 1:10 2WD Short Course

 1:10 4WD Buggy

ON ROAD

 1:12 2WD Pan Car

 1:10 2WD Pan Car

 1:10 World GT

 1:10 2WD Formula 1

 1:10 4WD Touring Car

OVAL

 1:10 2WD

 1:10 SK Car

 1:10 Stock Car

 1:10 Winged Sprint

 Billet 6061-T6 Aluminum Heat Sink Housing

 NEW FET Package

 NEW HD Easy Solder Posts

 Optional Shroud and High RPM Cooling Fan

 3rd Channel Input for On-The-Fly Drag Brake Adjustments <>

 QuickTune™ One Touch Programming

 Adjustable Torque Control *

 Adjustable Throttle and Brake Frequencies *

 HD High Voltage Programmable BEC *

 HotWire™ Programming Port *

 On-the-fly Drag Brake Adjustment

 Data Logging Capability *

 Sensor Checker

 On-Board Temperature Indicator

 ESC Self Diagnostics with Error Codes

 Fully Proportional Forward/Brake/Reverse

 Brushless and Brushed Motor Drive

 Sensored or Sensorless Operation

 LiPo Safe with Custom Voltage Cutoffs

 Sensor Plug for Precise Commutation

 HDAC: High Density Copper PCB's

 Ultra-smooth and Precise Throttle and Braking Control

* requires HotWire™ sold separately.

ON BOARD QuickTune™ PROGRAMMABLE FEATURES

 DB - Drag Brake (13 steps)

 BS - Brake Strength (13 steps)

 LM - Torque Limiter (7 steps)

 NW - Neutral Width (13 steps)

 TP - Timing Profiles 5 Preset - 2 Custom*

 MT - Motor Type

Brushless Modes - FWD Only / FWD-REV / FWD-REV Delay / FWD-REV Delay REV Motor Direction

Brushed Modes - FWD Only / FWD-REV / FWD-REV Delay

 VC - Voltage Cutoff : 2S, 3S, Custom*

* requires HotWire™ sold separately.

 Update ESC Firmware

 Create, Save, Load and Share Custom ESC Profiles

 Drag Brake (0-100 steps)

 Active Drag (ON/OFF)

 Brake Strength (0-100 steps) 

 Brake Minimum (0-30 steps) 

 Active Braking (0-6 steps) 

 RPM Brake (0-10 steps)

 Brake Frequency (750hz - 12kHz)

 Throttle Minimum (0-30 steps) 

 Throttle Frequency (2kHz - 12kHz) 

 Torque Control (0-10 steps) 

 Reverse Speed (0-100 steps)

 Reverse Delay (0-2seconds)

 Neutral Width (0-100 steps) 

 Push Control (0-100 steps) 

 Timing Profiles 5 Preset - 2 Custom