SLASH MODIFIED / SLASH REAR HD STEEL CVD AXLE SET 76mm, v3 2.5mm pins

For the Traxxas Modified, SLASH 4x4 (REAR) or SLASH 2wd (NOT Drag Slash, Rally, Bandit, etc).

New 1/8 scale style ver.3 set with larger cva couplers and larger 2.5mm pin.

Put down huge power with our heavy duty hardened steel complete CVA axle sets and diff cups.

-Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the stock plastic axle sets.

-Increased traction from improved suspension action due to less axle binding (the plastic sliders locks up when on throttle, preventing the suspension from moving freely).

-The new diff cups uses 2 set screws instead of the straight pin to remove all of the slop and reduces vibrations.

-New retaining sleeve for improved cva pin holding.

Requires blue thread lock and cvd oil or grease- not included.

Important: You want to reassemble with thick grease and apply blue thread lock to the set screw and tighten it with a quality hex tool, never an allen key which strips easily. Never over tighten hardware also. Be sure to degrease the set screw and threads so that the loctite can actually cure. If it's oily then it will not cure and can fall out.

Compatibility;

TRAXXAS MODIFIED

Hoss

Rustler 4x4 REAR

Slash 4x4 REAR

Slash 2WD

Stampede 4x4 REAR