RC-Project Kit Balls "REVERSE" in Ergal 7075-T6 for TEKNO RC NB/EB48.4  NB/EB48 2.0 The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a...

* Input Voltage: 5V* Input Current: 200-300mA* Interface: Type C* Working Voltage: 3.4-4.2V* Working Current: <10mA* Size: 45×12×80mm* Weight: 53g* Low-voltage Protection: <3.4V (Flashes Red)* Measuring Range: ±17.5°*...

The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact Surface between Bushing and Standoff; this allows a life of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

The Shock Pins are Made in Italy with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ.Diameters have been modified with respect to the Originals to have a better...

The Shock Pins are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ.Diameters have been modified with respect to the Originals to...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style. These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust...